Getting Started with OBS

This guide will help you correctly configure OBS Studio for use with your PORTTA DX20R capture device.

Step 1: Add Video Capture Device

1. Launch OBS Studio.
2. In the Sources panel, click +.
3. Select Video Capture Device.
4. Create a new source and click OK.
5. In the Device dropdown, select:

   DX20R Video Device

Step 2: Configure Audio Device

HDMI Audio (from DX20R)

1. Go to Settings → Audio.
2. Under Mic/Auxiliary Audio, select:

   HDMI (DX20R Audio Device)

External Microphone (Optional)

If you are using a dedicated microphone, please select:

Ex-Mic (EX DX20R Audio)

Step 3: Set Recording Quality (IMPORTANT)

⚠️ Important:
To ensure the best recording quality, please make sure the following setting is applied.

1. Go to Settings → Output.
2. Switch Output Mode to Simple (if not already).
3. Under Recording, set Recording Quality to:

   Indistinguishable Quality, Large File Size

   or any higher quality option.

Lower recording quality settings may result in compression artifacts or reduced image detail.

Official OBS Knowledge Base

For more detailed instructions and advanced settings, please refer to the official OBS Knowledge Base:

Additional Tips

• Make sure the DX20R device is connected before launching OBS.
  
• Check audio levels in the OBS mixer before starting your recording.